The best part: I had everything on hand (FREE!) and the whole project only took me a few hours!
Grabbing some old fence boards I had saved in the garage, I started by carefully removing all the rusty nails. I like the rustic look, so I just cleaned them up a bit and lightly sanded down the front. Then, I cut another board into three pieces that fit across the back of the four fence boards. Using wood screws, the boards were attached to the back of the sign.
Using paint from my craft room stash (and brushes you don’t love…the old fence is pretty rough), I started filling in the chalk lines. I wanted it to look a bit primitive, so I kept the shapes simple and did not do any detail.
Once I was happy with the image, I used chalk to outline my lettering and then filled it in with a glossy black paint.
After seeing several mantel signs on Pinterest with lights, I knew I wanted to include that feature on this porch sign. So, I drilled several holes around the face of the sign and ran a string of lights around the back…putting a bulb through each of the holes I had previously drilled.
It was even prettier once it was in its spot on the porch!
And, just in time to plug it in for the evening….
We love it and hope you do too!
This post is linked to: