Upcycled Bed Spring Chandelier

We finally have a light fixture above the dining room table!!  

The previous owner of our house removed the chandelier and patched the ceiling...I was told it was because he put a pool table in the room.  I've wanted to replace the fixture since we moved in 6+ years ago but the cost of an electrician, another person to repair the ceiling, and the light fixture itself kept the project on the "to-do" list.  I also did not want just any ordinary chandelier.  While it hangs over the formal dining table, it is a shared dining/living room.  Having a fancy fixture would not really go along with the rest of the decor, but too casual or too small and I wouldn't be happy with the overall look.

If you've followed me for very long, you know I LOVE a good upcycle project and adore the chance to turn something odd into something pretty!  

For over a year now, I've seen multiple projects made with old bed springs.  I even purchased two antique ones at a show last year...using them as candleholders now.  One booth at the Vintage Market Days was entirely dedicated to bed spring crafts...wreaths, candle holders, Christmas trees, etc.

Last Fall's VMD finds!

On Pinterest, I've seen several lighting projects using old crib springs and mattresses.  I liked the look of the wires and springs and the thought of such a noticeable fixture in the room!  The only problem was where to find an old mattress!?!?!

Then, this Summer, my son's school was cleaning out the gym and someone from the neighborhood threw a few items into the junk pile....one being an old, stripped set of bed springs!!  What?!?!  It was meant to be....at least that's what I told my son when I asked him to load it up after soccer practice!  ;)

Can'y you just see all the projects to be made with this?

I was still recovery from surgery at the time so I wasn't able to get started until this past week.  It only took a day to get in up and then I had to wait until my lights arrived from Amazon a couple of days later to complete it.  I am so happy with how it turned out!

To start, you'll need a good set of bolt cutters.  I broke the tip off of a pair of snips, so just use the bolt cutters upfront and save the hassle of running out to buy a pair like I had to!

Once I cut the mattress down to the size I wanted the fixture to be, I removed all of the clips and extra little stray pieces that were hanging from many of the springs.  I had my son hold the piece up and got an idea of how long we needed the chain to be on each side.

The only chain available at Home Depot that I liked was silver, so I purchased some Rustoleum Spray Paint in a rustic metallic color.  The chain took the spray paint easily and it was a great  match to the bedsprings.  I also painted the "s-hooks" that we used to attach the chain.

My son installed a heavy duty hook into the ceiling. I bought one that was rated for 45-lbs just in case. Once the chain and hooks dried, we took the pieces inside and started playing with the right height.  This is most definitely a two person job!!  My son was the only reason I was able to get this project completed....my upper body strength is not back to normal yet and the overhead work is still tough for me.

Once we figured out the right length for each chain, my son bent the ends of the s-hooks so that the chains would not slip off.  Then, we hung the fixture!  

I liked it immediately. The size was just right.  Earlier in the week, I found these lights at Big Lots for $10/each.  Two strings was perfect.  

The strings are very small with tiny lights and are battery-operated!! I wound them loosely all around the light fixture and secured the battery packs close to the sides so that I can reach them when needed.

Very cool!

I found some battery-operated, remote-controlled bulbs on Amazon that arrived a couple of days later. They complete the look and now I wish I had a remote for the other two strings!

All lit up!

Love it!

What do you think?  Would you hang an old bedspring from your ceiling?  :)

Happy DIY-ing!

Linked to:

http://www.niftythriftythings.com/nifty-thrifty-sunday-303/
https://tatertotsandjello.com/2017/10/best-friday-features-10-6-17.html

DIY Chalkboard "Established" Sign & Memo Board

Don't you just love chalkboards?  If you've been to my house (or read some of my previous posts, like this one), you know that I subscribe to the theory that you can never have enough chalkboards!  I use my chalkboard pantry doors for all kinds of things!!  Right now, they have our calendar on one side and a birthday message on the other!

Anyway....I was looking to make a housewarming gift for my newly married cousin.  She is a fan of the "farmhouse" style and I immediately came up with the idea of making them some version of an "established" sign.  After perusing Pinterest for awhile, I just wasn't quite inspired.  One afternoon after school, my son and I ran into the Habitat Store hoping for something to catch my eye.  And, there it was....the pile of cabinet doors!

I picked up this beauty for $1.00!  It appears to be unused...like maybe it was a sample for finishes because it doesn't have holes where hinges were located.  Score!!

After cleaning it up, I knew exactly what it was perfect for.....a chalkboard!!  I still wanted to do the "established" idea so I combined the two.  It became a CHALKBOARD ESTABLISHED SIGN and MEMO BOARD.

Start by taping of the edges and then follow the directions on your chalkboard paint.  Mine suggested two coats, one in one direction and one in the opposite. It also required 24 hours of curing time before prepping with chalk. You could leave it just like this...it makes a simple but pretty chalkboard!

My original plan for the "established sign" was to paint both the large initial and the last name in the center, but after accidentally scratching the surface after the first coat (easily touched-up btw)....I loved the idea of the wood grain showing through!  The easiest way to do this would be to use a vinyl letter, paint over it, and then remove it.  But, I already had painted my door, so I gently scraped the paint off in the shape of my letter.  I added a third coat of chalkboard paint by carefully painting around the letter. After curing for 24 hours, I prepped with chalk.

Then, using chalk to outline my lettering, I filled in the last name with a paint pen.

On the back, I taped a baggie with a piece of chalk and a cloth inside.  I also made a note reminding them NOT to use anything sharp on the painted surface.  Additionally, I used my wood burning tool to put my signature mark on the back and a note of congratulations to the couple.

Two hangers and it was done!

To gift it, I simply tied a pretty ribbon around it and added a few examples of notes they might write on it.

It was an easy and fun project!  Hope you enjoy making your own!

Happy Summer!

This post is linked to:
http://www.creativelylivingblog.com/2017/05/monday-funday-51.html
http://www.niftythriftythings.com/nifty-thrifty-sunday-284/

Delicious (& easy) Chocolate Chip Cheesecake Bars

How many of you watch those recipe videos on Facebook and drool over the food but never make it yourself?  I always think I will, but alas, the posts sit in my "saved" file.

Well, this week, this beauty of a recipe came up as I was scrolling my FB feed....Chocolate Chip Cookie Cheesecake Bars!!  I mean, seriously??!!??  It just so happened that I was online ordering my groceries for pick-up....meant to be. Ordered the ingredients I needed and that was that. I only have a couple of days more on leave from surgery and I'm feeling strong enough to do more, so perfect timing!

The recipe was everything it promised....so good and easy!  You can find the video here:
http://www.cookingpanda.com/video/food/2016/08/30/chocolate-chip-cheesecake-bar

This would make a great treat for your Easter celebrations this weekend too!
Enjoy!

A Lump in the Road

Life has taken a bit of a detour for me of late....a bump...or lump in this case...in the road.

A month ago today, a "highly concerning" lump was found in my left breast. After biopsy, it was found to be Stage 0 DCIS.....the best of the worst diagnosis. After much prayer and consultation, I'm scheduled for a bilateral mastectomy and reconstruction in 2 weeks.  Obviously, my crafting and DIY posts and projects will be a bit limited for awhile.

However, I'm still around....and I'll have plenty of time stuck at home in bed to plan some new projects!!

If you or anyone you know might find it helpful to read about my breast cancer journey, tips and hints along the way, etc., please come see me at It's a Bosom Thing @ www.bosomthing.blogspot.com

DIY Hand Towel Bib

If you have or have had little ones, you know how important bibs are, right?  My favorite one when my T was little was a terrycloth one made to slip over his head.  Other folks apparently love these too because there are tons of tutorials online to show you how to make them.

I won't go into major details today (like measurements) because if you need that, it's a quick Pinterest search away (see the link below for a great tutorial from Vanilla Joy).  But, I will show you how I made one of these awesome bibs...the really easy way!

I started off with a regular hand towel purchased at my local Walmart.  I found this pretty hot pink color...perfect for the little princess I was making it for!

I wanted this bib to last a long time for her so I chose NOT to cut the towel down in size.  And, instead of folding directly in half, I folded about 2/3 or 3/4??  See pic below:

I used the CD trick that was suggested in Vanilla Joy's tutorial for dishtowel bibs....it was perfect for the neckline!

Since I didn't have any ribbed knitting for the neck, I first started out using a neck from an old t-shirt.  But, it just didn't look right...seemed too thin.  Then, inspiration hit!  In my stash was an extra baby headband that was purchased to make baby tu-tus last year.  

I pinned the heck out of it (not a big fan of sewing in circles).....and it was perfect!  After attaching the band, be sure to topstitch on the outside (making sure the inside seam is down).

New neckline done!  Super easy and it's so stretchy and feminine.

Since this is for my primary NICU patient, I wanted to do something cute and fun for her family to remember us. (Applique and embroidery done with my Brother SE-400.)

My "baby" at home is 14 years old now, so I had to use a stuffed kangaroo as a model.... :)

This was a fun and easy project that you can customize and personalize as much or as little as you want.  Wouldn't these make super cute and useful gifts?

If you make some, post your pics in the comments.

Have a great week!